Meriam M334 4-20 Milliamp Loop Calibrator Bedienungsanleitung PDF herunterladen

Product Description

• EASY TO USE

With the Meriam Model M334 you can check,

calibrate and measure all your current signal

instruments in a 4 to 20 milliamp DC loop. It can

be used at any access point in your loop. Source &

Read 0.00 to 24.00 mA, Simulate a 2 Wire

Transmitter or use the Meriam Model M334 to

simultaneously power your 2 Wire Transmitter and

measure its output. When desired the Meriam

Model M334 can display current in milliamps or

percent of 4 to 20.

• SOURCE MILLIAMPS

Calibrate recorders, digital indicators, stroke valves

or any instruments that get their input from a 4 to

20 mA loop. Easily set any value quickly to within

0.01 mA with the adjustable digital potentiometer

“DIAL” or use preset 4.00 mA (0.0%) and 20.00

mA (100.0%) EZ-CHECK™ settings.

• RECALL OUTPUT SETTINGS

The EZ CHECK™ switch provides rapid checking

of 4.00, 20.00 and any convenient third point

between 0.00 to 24.00 mA.

• CALIBRATE USING LOOP POWER

Check loop wiring and receivers by using the

Meriam Model M334 in place of a 2 Wire

transmitter. Simulate a changing process input to

check loop response and control settings. The

Meriam Model M334 uses any loop power from 2

to 100V DC.

• READ LOOP CURRENT

Check controller outputs or measure the milliamp signal anywhere in the loop. The Meriam

Model M334 measures 0.00 to 52.00 mA signals with greater accuracy than a typical multimeter.

The Meriam Model M334 can be easily switched to display milliamps or percent of 4 to 20.

• POWER & MEASURE 2 WIRE TRANSMITTERS

The Meriam Model M334 can simultaneously output 24V DC to power any and all devices in a

process loop using the internal batteries and the internal switching power supply, while

measuring the output of a 2 Wire Transmitter and any other loop devices. This is handy for

checking the functionality of transmitters in the field or on the bench.

• READ DC VOLTS

The Meriam Model M334 can measure from -99.99 to +99.99 VDC with 10mV resolution. Use it

to check loop power supplies, I/V converters, chart recorders, 1 to 5 Volt signals, and any other

voltages within this range making it unnecessary to carry an additional multimeter.

Meriam Model M334

4-20 mA Loop Calibrator

Operating Instructions

Meriam Model M334

4-20 mA Loop Calibrator

Operating Instructions

Meriam Process Technologies

10920 Madison Ave. • Cleveland, OH 44102 Tel: 216.281.1100 • Fax: 216.281.0228 • [email protected] • www.meriam.com



1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - Meriam Model M334

Product Description• EASY TO USEWith the Meriam Model M334 you can check, calibrate and measure all your current signal instruments in a 4 to 20 mill

Seite 2 - Meriam Process Technologies

q POWER SWITCHSelect “mA” to display and calibrate in milliamps.Select “% 4 to 20 mA” to display and calibrate in percent. Select “READ VDC” to

Seite 3 - Reading Milliamp Outputs

mA OUT, % OUT (Percent of 4 to 20 mA)Choose this function to provide an output from 0.00 to 24.00 milliamps. The compliance voltage is a nominal 24 VD

Seite 4 - Simulate 2-Wire Transmitters

2 Wire mA, 2 Wire % (Percent of 4 to 20 mA)Choose this function to simulate a 2 Wire Transmitter output from 0.00 to 24.00 milliamps. Operates in loop

Seite 5 - Application Notes

READ VChoose this function to measure from -99.99 to +99.99V DC.1) Select “READ VDC” with slide switch q.2) Connect the red (+) and black (-)

Seite 6 - Accessories

AccessoriesAC ADAPTOR (200 to 240 VAC) Part No. 020-0100AC ADAPTOR (100 to 120 VAC) Part No. 020-0101Ni-MH 1 Hour Charger w/4 Ni-MH AA Batte

Seite 7 - Meriam M334 Specifications

GeneralOperating Temperature Range -20 to 60 °C (-5 to 140 °F)Storage Temperature Range -30 to 60 °C (-22 to 140 °F)Relative Humidity Range 10 % ≤RH ≤

Seite 8 - Additional Information

Source/Power & Measure Two Wire TransmittersM334 Ranges and Resolution0.00 to 24.00 mA Full Span or -25.0 to 125.0% of 4-20 mAAccuracyEZ Check(s)

Kommentare zu diesen Handbüchern

Keine Kommentare

Meriam M334 4-20 Milliamp Loop Calibrator Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Werkzeug Meriam M334 4-20 Milliamp Loop Calibrator herunter. Meriam M334 4-20 Milliamp Loop Calibrator User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Meriam M334 4-20 Milliamp Loop Calibrator